Enterprise Postgres 17 SP1 Messages

needs to set at least @1@ to "max_worker_processes"

@1@ total checksum verification failure

@1@ and @2@ are incompatible options

@1@ can only be called in a sql_drop event trigger function

@1@ can only be called in a table_rewrite event trigger function

@1@ can only be called in an event trigger function

@1@ cannot be applied to a function

@1@ cannot be applied to a join

@1@ cannot be applied to a WITH query

@1@ cannot be applied to the nullable side of an outer join

@1@ cannot be applied to VALUES

@1@ cannot be executed from VACUUM or ANALYZE

@1@ cannot be used as a role name here

@1@ cause an error in heartbeat: @2@

@1@ causes an error at application connection: @2@

@1@ function has @2@ columns available but @3@ columns specified

@1@ is not allowed with aggregate functions

@1@ is not allowed with DISTINCT clause

@1@ is not allowed with GROUP BY clause

@1@ is not allowed with HAVING clause

@1@ is not allowed with set-returning functions in the target list

@1@ is not allowed with UNION/INTERSECT/EXCEPT

@1@ is not allowed with window functions

@1@ is not an ordered-set aggregate, so it cannot have WITHIN GROUP

@1@ is not VCI index

@1@ must be called in REPEATABLE READ isolation mode transaction

@1@ must be called inside a transaction

@1@ must not be called in a subtransaction

@1@ must not be called inside a transaction

@1@ must specify unqualified relation names

@1@ needs a slot to be specified using --slot

@1@ the prepared transaction with gid: "@2@"

@1@(@2@) failed for @3@ address "@4@": @5@

@1@: Copy of objects for allnodes and Setup of replication table weren't executed

@1@: could not connect to database "@2@"

@1@: could not connect to database "postgres" or "template1"

@1@: could not create file "@2@" for writing

@1@: could not locate my own executable path

@1@: could not open file "@2@" for writing

@1@: could not remove initialize.signal file

@1@: could not remove scaleout.signal file

@1@: could not remove scaleout_passfile

@1@: Failed connect to coodinator

@1@: Failed copy replication table

@1@: Failed define objects to datanode

@1@: Failed make replication object

@1@: Failed open initialize.signal

@1@: Failed open postmaster.pid

@1@: Failed read initialize.signal

@1@: initialize.signal does not exist

@1@: out of memory

@1@: pg_dumpall failed

@1@: postmaster.pid does not exist

@1@: query failed: @2@

@1@: query was: @2@

@1@: Stop sever process and re-execute pg_ctl start with longer timeout

"@1@" is not a directory

"@1@" is not pid file: number of line is not enough(expect 4 but @2@)

"root" execution of the conmgr is not permitted.The conmgr must be started under an unprivileged user ID to preventpossible system security compromise. See the documentation formore information on how to properly start the conmgr.

"VARYING" cannot have a level number greater than 48

Is the server running locally and accepting connections on that socket?

Is the server running on that host and accepting TCP/IP connections?

a new master encryption key has been set (@1@/@2@)

aborting any active transactions

All directory entries in pg_tblspc/ should be symbolic links.

another conmgr process is running

another conmgr process is shutting down

another conmgr process is starting up

another conmgr process(PID @1@) is running

application connection is closed by remote in @1@

array slice subscript must provide both boundaries

at least one COORDINATOR is needed

authentication identifier set more than once

bind message has @1@ parameter formats but @2@ parameters

bind message has @1@ result formats but query has @2@ columns

bind message supplies @1@ parameters, but prepared statement "@2@" requires @3@

canceling authentication due to timeout

canceling statement due to conflict with recovery

canceling statement due to statement timeout

cannot @1@ "@2@" because it has pending trigger events

cannot @1@ "@2@" because it is being used by active queries in this session

cannot change client_encoding during a parallel operation

cannot create temporary tables during recovery

cannot enter pipeline mode, connection not idle

cannot exit pipeline mode while busy

cannot exit pipeline mode with uncollected results

cannot replace existing key

cannot uniquely identify the id

certificate does not match private key file "@1@": @2@

checkpoints are occurring too frequently (@1@ second apart)

closing all application connections

cmdata directory "@1@" does not exist

collect shardinfo connection failed: @1@

conmgr process is ready

conmgr process is starting

conmgr process shutting down

conmgr process stopped

connection manager directory "@1@" does not exist

connection to client lost

connection to server at "@1@" (@2@), port @3@ failed:

connection to server at "@1@", port @2@ failed:

connection to server on socket "@1@" failed:

COPY statement cannot be null

could not accept application connection: @1@

could not accept heartbeat connection: @1@

could not accept new connection: @1@

could not accept SSL connection: @1@

could not accept SSL connection: EOF detected

could not access to cmdata directory "@1@": @2@

could not access to connection manager directory "@1@": @2@

could not add node: host=@1@ hostaddr=@2@ port=@3@

could not be ready for next command: @1@

could not bind @1@ address "@2@": @3@

could not bind port @1@ with following causes

could not bind to local address "@1@": @2@

could not change directory to "@1@": @2@

could not check the existence of the backend with PID @1@: @2@

could not connect due to the following errors

could not connect to conmgr process: @1@

could not connect to database @1@: out of memory

could not connect to Ident server at address "@1@", port @2@: @3@

could not connect to publisher when attempting to drop replication slot "@1@": @2@

could not connect to the primary server: @1@

could not create @1@ socket for address "@2@": @3@

could not create an additional interval event: @1@

could not create archive status file "@1@": @2@

could not create bufferevent: @1@

could not create conmgr process: @1@

could not create directory "@1@": @2@

could not create file "@1@": @2@

could not create lock file "@1@": @2@

could not create missing directory "@1@": @2@

could not create pid file "@1@": @2@

could not create pipe for syslog: @1@

could not create shared memory segment: @1@

could not create ShmemIndex entry for data structure "@1@"

could not create socket for Ident connection: @1@

could not create socket: @1@

could not drop relation mapping for subscription "@1@"

could not duplicate socket @1@ for use in backend: error code @2@

could not establish heartbeat connection

could not establish SSL connection: @1@

could not extend file "@1@": @2@

could not extend file "@1@": wrote only @2@ of @3@ bytes at block @4@

could not get a result from conmgr process: @1@

could not get function(@1@) from library "@2@" :@3@

could not get home directory to locate root certificate fileEither provide the file or change sslmode to disable server certificate verification.

could not get peer credentials: @1@

could not get string format address: @1@

could not initialize checksum of file "@1@"

could not initialize SSL connection: @1@

could not interpret result from server: @1@

could not listen for socket: @1@

could not listen on @1@ address "@2@": @3@

could not load locale "@1@"

could not load private key file "@1@": @2@

could not lock semaphore: error code @1@

could not notify application: @1@

could not obtain lock on row in relation "@1@"

could not open certificate file "@1@": @2@

could not open file "@1@": @2@

could not open pid file "@1@": @2@

could not parse connection string: @1@

could not prepare for heartbeat: @1@

could not prepare statement to fetch file contents: @1@

could not read certificate file "@1@": @2@

could not read from logger pipe: @1@

could not read from pid file "@1@": @2@

could not read lock file "@1@": @2@

could not read root certificate file "@1@": @2@

could not read symbolic link "@1@": @2@

could not receive a heartbeat packet: @1@

could not receive data from client: @1@

could not receive data from server: @1@

could not receive database system identifier and timeline ID from the primary server: @1@

could not receive response from Ident server at address "@1@", port @2@: @3@

could not remove pid file "@1@": @2@

could not reply all application info: @1@

could not reply all node info: @1@

could not reply for startup: @1@

could not reply target node info: @1@

could not resolve address: @1@

Could not resolve client IP address to a host name: @1@.

could not seek pid file "@1@": @2@

could not send @1@: @2@

could not send data to client: @1@

could not send data to server: @1@

could not send query to Ident server at address "@1@", port @2@: @3@

could not send signal to conmgr process: @1@

could not send signal(@1@) to conmgr process(PID: @2@): @3@

could not set socket to nonblocking mode: @1@

could not set SSL Server Name Indication (SNI): @1@

could not set SSL socket: @1@

could not start conmgr process due to setsid() failure: @1@

could not start conmgr process in time

could not start conmgr process: @1@

could not start conmgr process

could not stat file "@1@": @2@

could not stop conmgr process in time

could not sync to pid file "@1@": @2@

Could not translate client host name "@1@" to IP address: @2@.

could not translate name

could not try-lock semaphore: error code @1@

could not write archive status file "@1@": @2@

could not write block @1@ in file "@2@": @3@

could not write block @1@ in file "@2@": wrote @3@ of @4@

could not write block @1@ in file "@2@": wrote only @3@ of @4@ bytes

could not write bootstrap write-ahead log file: @1@

could not write file "@1@": @2@

could not write pid file "@1@": @2@

could not write server file "@1@": @2@

could not write temporary statistics file "@1@": @2@

could not write to COPY file: @1@

could not write to file "@1@": @2@

could not write to log file @1@ at offset @2@, length @3@: @4@

could not write to pid file "@1@": @2@

database is not accepting commands to avoid wraparound data loss in database "@1@"

database is not accepting commands to avoid wraparound data loss in database with OID @1@

deadlock detected

disconnection: session time: @1@:@2@:@3@.@4@ user=@5@ database=@6@ host=@7@@8@@9@

either backend_host or backend_hostaddr is needed for instance #@1@

ending log output to stderr

error is occured for completion of asynchronous connect for heartbeat: @1@

error sending command to database "@1@": @2@

Execution of conmgr by a user with administrative permissions is notpermitted.The conmgr must be started under an unprivileged user ID to preventpossible system security compromises. See the documentation formore information on how to properly start the conmgr.

expected authentication request from server, but received @1@

expected GSS response, got message type @1@

expected password response, got message type @1@

expected SSPI response, got message type @1@

failed to add new prepared transaction "@1@" by worker(@2@)

failed to delete the record with id: @1@(SPI returned: @2@)

failed to execute SPI returned @1@

failed to fetch id column from "@1@" by worker(@2@)

failed to send GSSAPI negotiation response: @1@

failed to update state column of record with id: @1@

function call message contains @1@ argument formats but @2@ arguments

function call message contains @1@ arguments but function requires @2@

heartbeat connect is refused: @1@

heartbeat connect is timed out

heartbeat connection is established

heartbeat is timed out

host name must be specified for a verified SSL connection

host name must be specified

incomplete message from client

incomplete multibyte character

incomplete startup packet

Increase watchdog.max_hb_connections.

internal error: received unexpected database pattern_id @1@

internal error: received unexpected relation pattern_id @1@

invalid argument size @1@ in function call message

invalid connection option "@1@"

invalid DESCRIBE message subtype @1@

invalid frontend message type @1@

invalid length of startup packet

invalid message format

invalid message length

invalid parameter '@1@' in configuration file "@2@" line @3@

invalid password packet size

invalid pid file "@1@"

invalid record length at @1@/@2@: wanted @3@, got @4@

invalid response from primary server

invalid socket: @1@

invalid standby message type "@1@"

invalid startup packet layout: expected terminator as last byte

invalid string in message

invalid timeout "@1@"

invalid value for integer parameter in configuration file "@1@" line @2@

invalid value for parameter '@1@'

invalid value for parameter '@1@' in configuration file "@2@" line @3@

invalid value for parameter '@1@' of instance #@2@

Keystore does not require passphrase.

lack of max_prepared_transactions

level number 77 could not be used for group item

level number 77 could not be used in TYPEDEF statement

Limits the total size of all temporary files used by each process.

line @1@ too long in service file "@2@"

listening on @1@ port @2@

logical replication target relation "@1@.@2@" uses system columns in REPLICA IDENTITY index

lost synchronization with server: got message type "@1@", length @2@

materialize mode required, but it is not allowed in this context

max_prepared_transactions must be set at least @1@

message contents do not agree with length in message type "@1@"

missing "=" after "@1@" in connection info string

new primary COORDINATOR has been connected

no cmdata directory specified and environment variable CMDATA unset

no connection manager directory is specified and environment variable CMDATA is unset

no data left in message

no empty local buffer available

no operation mode is specified

no target server address from Connection Manager

node_name is needed for instance #@1@

node_name is not needed for instance #@1@

not enough elements in RWConflictPool to record a potential read/write conflict

not enough elements in RWConflictPool to record a read/write conflict

not enough shared memory for data structure "@1@" (@2@ bytes requested)

number of workers must not be negative

oldest multixact is far in the past

one of -d/--dbname and -f/--file must be specified

out of memory allocating GSSAPI buffer (@1@)

out of memory for query result

out of memory on line @1@

out of shared memory

pgx_global_metacache must be set to at least 10MB when enabled.

pgx_loader only available using COPY FROM

pid file "@1@/conmgr.pid" does not exist

posting list is too long

postmaster exited during a parallel loading

pre-existing shared memory block (key @1@, ID @2@) is still in use

private key file "@1@" has group or world access; file must have permissions u=rw (0600) or less if owned by the current user, or permissions u=rw,g=r (0640) or less if owned by root

private key file "@1@" is not a regular file

private key file "@1@" must be owned by the database user or root

protocol error: id=0x@1@

query failed: @1@

query would be affected by row-level security policy for table "@1@"

real and effective user IDs must match

realm name too long

received fast shutdown request

received immediate shutdown request

received invalid response to SSL negotiation: @1@

received invalid startup packet

received smart shutdown request

received unencrypted data after GSSAPI encryption request

received unencrypted data after SSL request

recovery has paused

rejected a connection from application due to going shutdown

remote node closes heartbeat connection

remote node shuts down heartbeat connection

Remove those directories, or set allow_in_place_tablespaces to ON transiently to let recovery complete.

results of copying file does not exist

RETURNING list entry has type @1@, but column has type @2@.

role with OID @1@ does not exist

root certificate file "@1@" does not existEither provide the file or change sslmode to disable server certificate verification.

SELECT target entry has type @1@, but column has type @2@.

SELECT target entry is named "@1@".

select() failed in postmaster: @1@

server certificate for "@1@" does not match host name "@2@"

server sent data ("D" message) without prior row description ("T" message)

service file "@1@" not found

set-valued function called in context that cannot accept a set

Sleep until another process releases global meta cache because global meta cache cannot be swept away yet. Please increase pgx_global_metacache.

SSL certificate's common name contains embedded null

SSL connection has been closed unexpectedly

stack depth limit exceeded

standby mode is not supported by single-user servers

started conmgr process successfully

starting conmgr process

stopped conmgr process successfully

String constants with Unicode escapes cannot be used when standard_conforming_strings is off.

string is not a valid identifier: "@1@"

synchronous_standby_names parser failed

syntax error in service file "@1@", line @2@

syntax error near '@1@' in configuration file "@2@" line @3@

syntax error near end of line in configuration file "@1@" line @2@

TDE_h extension must be loaded via shared_preload_libraries

TDE_h: @1@ failed: @2@ [@3@]

TDE_h: C_Login: @1@ [@2@]

TDE_h: Expected key not found: @1@ [@2@]

TDE_h: Operation is not supported

TDE_h: HPCS Service API Key is not available at load time

TDE_h: PKCS11 Slot ID is not defined

TDE_h: Slot @1@ C_GetMechanismInfo CKM_AES_CBC: @2@ [@3@]

TDE_h: Slot @1@ C_GetMechanismInfo CKM_AES_KEY_GEN: @2@ [@3@]

TDE_h: Slot @1@ C_OpenSession: @2@ [@3@]

TDE_h: Slot @1@ mechanism does not support CKF_DECRYPT

TDE_h: Slot @1@ mechanism does not support CKF_ENCRYPT

TDE_h: Slot @1@ mechanism does not support CKF_GENERATE

TDE_h: Slot @1@ token model '@2@' is not supported

TDE_h: Slot @1@ token model is '@2@'

TDE_h: Unable to initialize for TDE_h environment

TDE_h: Unable to initialize the PKCS11 library: 0x@1@ [@2@]

TDEz: Operation is not supported

TDE_z extension must be loaded via shared_preload_libraries

TDE_z: C_Login: @1@ [@2@]

TDE_z: Expected key not found: @1@ [@2@]

TDE_z: PKCS11 Slot ID is not defined

TDE_z: PKCS11 User PIN is not available at load time

TDE_z: Slot @1@ C_GetMechanismInfo CKM_AES_CBC: @2@ [@3@]

TDE_z: Slot @1@ C_GetMechanismInfo CKM_AES_KEY_GEN: @2@ [@3@]

TDE_z: Slot @1@ C_OpenSession: @2@ [@3@]

TDE_z: Slot @1@ mechanism does not support CKF_DECRYPT

TDE_z: Slot @1@ mechanism does not support CKF_ENCRYPT

TDE_z: Slot @1@ mechanism does not support CKF_GENERATE

TDE_z: Slot @1@ token model '@2@' is not supported

TDE_z: Slot @1@ token model is '@2@'

TDE_z: Unable to initialize the opencryptoki library: 0x@1@ [@2@]

TDE-type is inconsistent between keystore and postgresql.conf.

terminating connection due to conflict with recovery

terminating connection due to idle-session timeout

terminating connection due to unexpected postmaster exit

terminating walsender process due to replication timeout

terminator: could not prepare statement for "@1@"

terminator: terminated connections: ipaddress="@1@"

the database system is in recovery mode

the database system is not accepting connections

the database system is not yet accepting connections

the database system is shutting down

the database system is starting up

The program "@1@" is needed by @2@ but was not found in thesame directory as "@3@".Check your installation.

The program "@1@" was found by "@2@"but was not the same version as @3@.Check your installation.

The sslservercertcn "@1@" could not be verified

timeout expired

too long literal in configuration file "@1@" line @2@

too many background workers

too many command-line arguments (first is "@1@")

too many grouping sets present (maximum 4096)

translated account name too long

trigger created with DO block cannot be replaced by EXECUTE PROCEDURE

trigger created with EXECUTE PROCEDURE cannot be replaced by DO block

type input function @1@ should not be volatile

type modifier input function @1@ should not be volatile

type modifier output function @1@ should not be volatile

type output function @1@ should not be volatile

type receive function @1@ should not be volatile

type send function @1@ should not be volatile

unexpected directory entry "@1@" found in @2@

unexpected EOF on standby connection

unexpected EOF within message length word

unexpected field count in "D" message

unexpected message from server during startup

unexpected message type "@1@"

unexpected message type 0x@1@ during COPY from stdin

unexpected response from server; first received character was "@1@"

Unicode escapes must be \\uXXXX or \\UXXXXXXXX.

unrecognized operation mode "@1@"

unrecognized SSL error code: @1@

unrecognized stop mode "@1@"

unrecognized value "@1@" for option '-i'

unterminated quoted string in connection info string

Use '' to write quotes in strings, or use the escape string syntax (E'...').

Use '' to write quotes in strings. \\' is insecure in client-only encodings.

Use the escape string syntax for backslashes, e.g., E'\\\\'.

Use the escape string syntax for escapes, e.g., E'\\r\'.

waiting conmgr process to connect to watchdog

watchdog: could not accept heartbeat connection

watchdog: could not send attribute

You might need to increase max_worker_processes.

An error occurred while setting up the GSS Encoded connection.

An error occurred while setting up the SSL connection.

An I/O error occurred while sending to the backend.

An unexpected result was returned by a query.

Cannot connect to Connection Manager when targetServerType is "preferPrimary".

CommandComplete expected COPY but got:

Connection attempt timed out.

Could not close SSL certificate file @1@.

Could not find a server with specified targetServerType: @1@

Database cannot be null

Database connection failed when canceling copy operation

Database connection failed when ending copy

Database connection failed when reading from copy

Database connection failed when starting copy

Database connection failed when writing to copy

enableFdwAcs cannot be set "on" when targetServerType is "preferPrimary".

Expected an EOF from server, got: @1@

Expected command status BEGIN, got @1@.

Got @1@ error responses to single copy cancel request

GSS Authentication failed

hstore key must not be null

Interrupted while attempting to connect.

Invalid gssEncMode value: @1@

Invalid targetServerType value: @1@

Missing expected error response to copy cancel request

Neither Subject.doAs (Java before 18) nor Subject.callAs (Java 18+) method found

One or more ClientInfo failed.

PreparedStatement can have at most @1@ parameters. Please consider using arrays, or splitting the query in several ones, or using COPY. Given query has @2@ parameters

Protocol error. Session setup failed.

Ran out of memory retrieving query results.

Read from copy failed.

The connection attempt failed.

The server does not support GSS Encoding.

The server does not support GSS Encryption.

The server requested password-based authentication, but no password was provided by plugin @1@

The server requested SCRAM-based authentication, but the password is an empty string.

The server''s client_encoding parameter was changed to @1@. The JDBC driver requires client_encoding to be UTF8 for correct operation.

The server''s DateStyle parameter was changed to @1@. The JDBC driver requires DateStyle to begin with ISO for correct operation.

The server''s standard_conforming_strings parameter was reported as @1@. The JDBC driver expected on or off.

The sslservercertcn @1@ could not be verified by hostnameverifier @2@.

Unable to find pkcs12 keystore.

Unable to load Authentication Plugin @1@

Unable to parse URL @1@

Unexpected command status: @1@.

Unexpected copydata from server for @1@

Unknown Response Type @1@.

User cannot be null

Value is not an OID: @1@

could not read file "{0}": exception={1}: {2}

{0}: wrong number of server ID in definition file "{1}"

{0}: server ID not found in definition file "{1}" line {2}

{0}: server ID specified in definition file "{1}" too long (max {2} bytes) line {3}

invalid host name or IP address "{1}" in definition file "{0}"

{0}: invalid port number in definition file "{1}" line {2}

{0}: invalid format specified in definition file "{1}" line {2}

{0}: invalid value for parameter "{2}" in definition file "{1}"

{0}: no value for parameter "{2}" specified in definition file "{1}"

{0}: unrecognized parameter "{2}" in definition file "{1}"

%s: no operation mode specified

%s: unrecognized operation mode "%s"

%s: option "%s" duplicated

%s: "%s" option conflicts with "%s" option

%s: option requires an argument -- %s

%s: neither "%s" option nor environment variable "%s" specified

%s: out of memory

detected an error on the monitored object "{0}({1})": {2}

unexpected error occurred in the monitoring process: {0}

starting to {2} from {0} to {1}.

{2} completed.switched from {0} to {1}

failed to {2} from {0} to {1}

starting to detach standby server "{0}" {1}

detach standby server "{0}" completed {1}

failed to {2} standby server "{0}" {1}

another "{0}" command is running

communication timeout of Mirroring Controller occurred server:"{0}"

could not create PID file "{0}" of Mirroring Controller detail of cause:"{1}"

could not remove PID file "%s" of Mirroring Controller detail of cause:"%s"

could not read PID file "%s" of Mirroring Controller detail of cause:"%s"

invalid contents of PID file "%s" of Mirroring Controller

Mirroring Controller is already running

cannot execute %s command because Mirroring Controller is not running

failed to start database instance

failed to stop database instance target server:"{0}"

Mirroring Controller option is not installed

starting Mirroring Controller

Mirroring Controller started

failed to start Mirroring Controller

stopping Mirroring Controller

Mirroring Controller stopped target server:"{0}"

failed to stop Mirroring Controller target server:"{0}"

stopping Mirroring Controller forcibly

stopped Mirroring Controller forcibly

enabled failover target server:"{0}"

failed to enable failover target server:"{0}"

disabled failover target server:"{0}"

failed to disable failover target server:"{0}"

{0}: server ID "{2}" specified with option "{1}" does not exist in definition file "{3}"

{0}: The IP address or host name of the server where the command was executed in is not found on the definition file "{1}"

{0}: wrong server ID "{2}" in definition file "{1}"

failed to detach standby server

could not write to file "{0}": exception={1}: {2}

unexpected error occurred in the monitoring process: {0}

unexpected error occurred: {0}

failed to stop Mirroring Controller forcibly

could not access path "%s" specified as a directory for Mirroring Controller detail of cause:"%s"

system call error occurred:"%s" detail of cause:"%s"

could not get installation path

could not access path "%1$s" for parameter "%2$s" in definition file "%3$s" detail of cause:"%4$s"

promotion processing completed

promotion processing failed

stopped database instance forcibly

failed to stop database instance forcibly

did not switch during a degeneration use

{0}: users other than an instance administrator have the access privileges for definition file "{1}"

Try "%s --help" for more information.\n

starting to {0}

error detected in handling of the database instance detail of cause:"{0}"

could not read PID file "{0}" of Mirroring Controller detail of cause:"{1}"

invalid contents of PID file "{0}" of Mirroring Controller

cannot execute "{0}" command because Mirroring Controller is not running

%s: argument of option "%s" is too long

%s: invalid option -- %s

%s: unnecessary operand "%s"

%s: unrecognized operation mode or no operation mode specified

start to enable the parameter "{1}" required to build in the standby server "{0}"

enableing the parameter "{1}" required to build in the standby server "{0}" completed

failed to enable the parameter "{1}" required to build in the standby server "{0}"

primary server is already running

cannot start Mirroring Controller because database instance is not running

could not get state of database instance detail of cause:"{0}"

unusable character is included in path "%s" specified as a directory for Mirroring Controller

%1$s: unusable character is included in server ID "%3$s" specified with option "%2$s"

only instance administrator can execute this command

could not read file "{0}": Permission denied

host name or IP address "{1}" of the primary server and the standby server in definition file "{0}" are same, but the --local-server option was not specified

this feature is not available in this edition

installation environment is destroyed

%s: invalid argument for option %s

could not remove file or directory "{0}"

could not write file "{0}": exception={1}: {2}

setup of standby server completed

setup of standby server failed

{0}: server""{1}"" is running as a standby server

cannot execute {0} command because Mirroring Controller is running

cannot execute {0} command because database instance is running

{0}: invalid argument value {2} for option {1}

could not move file or directory from {0} to {1}

could not create directory {0}

could not read the access privileges of {0}

failed to set the access privileges of {0}

service "{0}" is not registered

could not start service "{0}" detail of cause:"{1}"

could not start service "%s" detail of cause:"%s"

service "%s" is not registered

Mirroring Controller service "%s" has been registered

Mirroring Controller service "%s" has been unregistered

service name "%s" is already in use

could not register service "%s" detail of cause: "%s"

could not unregister service "%s" detail of cause: "%s"

%s: option "%s" is required

no authority to execute this command

could not receive respons from {0} server({1})

detected streaming replication error in {0} server({1})

disk drives are available

a {0} server({1}) is running normally

Streaming Replication has started

postmaster is running in {0} server({1})

failed to get the standby server information

{0} server({1}) was downed

You can promote the standby server

You cannot promote the standby server

detected a disk I/O error in {0} server({1})

starting to switch over forcibly

succeeded in switching over to {0} forcibly

failed to switch over to {0} forcibly

starting to detach standby server forcibly

succeeded in detaching standby server "{0}" completed forcibly

failed to detach standby server "{0}" forcibly

{0}: the specified option is invalid: "{1}"

disabled standby server "{0}" to automatically switch because of canceling the synchronous replication for standby server

disabled standby server "{0}" to automatically switch

failed to disable standby server "{0}" to automatically switch

{0}: invalid server kind specified in definition file "{1}" line {2}

{0}: server kind 'arbiter' do not specified in definition file "{2}" despite value 'arbitration' is specified parameter heartbeat_error_action in definition file "{1}"

{0}: could not specify server kind 'arbiter' in definition file "{3}" because value '{2}' is specified parameter heartbeat_error_action in definition file "{1}"

{0}: second port number to use for the arbitration network is not specified in definition file "{1}"

{0}: could not specify second port number to use for the arbitration network in definition file "{3}" because value '{2}' is specified parameter heartbeat_error_action in definition file "{1}"

{0}: second IP address to use for the arbitration network is not specified in definition file "{1}"

{0}: cannot specify second IP Address on server kind 'arbiter' in definition file "{1}"

{0}: could not use parameter '{3}' because value '{2}' is specified parameter heartbeat_error_action in definition file "{1}" [Discription] Could not use parameter in "server identifier".conf.

{0}: could not use option "{3}" because value '{2}' is specified parameter heartbeat_error_action in definition file "{1}"

requesting arbitration server "{0}" to connect

trying to connect to arbitration server "{0}"

succeeded in connection with arbitration server "{0}"

failed to connect to arbitration server "{0}" event:"{1}"

disconnected from arbitration server "{0}"

timeout waiting for communication with Mirroring Controller Arbitration process server:"{0}"

failed to open communication environment detail of cause:"{0}"

invalid port number for server "{0}" in definition file "{1}"

communication error with the arbitration server "{0}" occurred

failed to start Mirroring Controller because of could not connect to arbitration server "{0}"

the arbitration server "{0}" arbitrated status of database server "{1}" as sanity

the request for arbitration was omitted because fencing command for a database server "{0}" was finished already

arbitration processing cannot request because the "{0}" command is carrying out

timeout waiting for requesting arbitration server "{0}" to arbitrate

requesting arbitration server "{0}" to fence database server "{1}"

arbitration server "{0}" succeeded in fencing for database server "{1}"

arbitration server "{0}" failed to fence for database server "{1}". detail of cause: check log file in arbitration server

timeout waiting for a request to fence to arbitration server "{0}"

arbitration server "{0}" rejected the request to fence database server "{1}"

could not request "{1}" because of disconnecting from arbitration server "{0}"

rejeceted a request arbitration server "{1}" because database server "{0}" was beening fencing

requested arbitration server "{0}" to disable standby server "{1}" to automatically switch

arbitration server "{0}" fenced standby server "{1}" because of failed to disable the standby server to automatically switch

arbitration server "{0}" tried to fence standby server "{1}" because of failed to disable the standby server to automatically switch, however fencing was failed

requested standby server "{0}" to disable automatically switching

{0}: cannot execute switching over forcibly other than on standby server

{0}: cannot execute detaching forcibly other than on primary server

forcible switch over to standby server "{0}" was requested although the data may be not synchronous with primary server

database server which is able to be switched over is not found

starting to detach standby server

database server which needs to be detached is not found

database server already has been detached

failed to switch over forcibly

failed to detach standby server forcibly

could not {1} because {0} server is abnormal

value of heartbeat_error_action is different from the value of other server "{0}"

restarting Mirroring Controller process because an its error was detected: %s

Mirroring Controller process was restarted

failed to restart Mirroring Controller

could not access "{0}" file detail of cause:"{1}"

invalid contents of "{0}" file

executing arbitration command and inquiring the result of arbitration

executing fencing command

starting degenerate because of result of arbitration command for database server "{0}" result:"{1}"

degeneracy is not executed because of result of arbitration command to database server "{0}" result:"{1}"

timeout has occurred during arbitration command has been executing to database server "{0}"

{0}: two or more standby server names are specified in the parameter "synchronous_standby_names" in PostgreSQL

the arbitration server "{0}" didn't arbitrate status of database server "{1}" as sanity

fencing command for database server "{0}" succeeded: result:"{1}"

fencing command for database server "{0}" failed: result:"{1}"

executing state-transition-command kind of command:{0}

state-transition-command has done kind of command:{0}

timeout has occurred to state-transition-command kind of command:{0}

detected recovery from an error on monitoring of table space({0})

detected no responce on monitoring of database process

detected recovery from no responce on monitoring of database process

{0}: the user name specified in parameter db_instance_username of definition file "{1}" is not database superuser

{0}: the user name specified in parameter db_instance_username of definition file "{1}" does not exist

{0}: could not specify second IP address to use for the arbitration network in definition file "{3}" because value '{2}' is specified parameter heartbeat_error_action in definition file "{1}"

{0}: cannot specify second port number on server kind 'arbiter' in definition file "{1}"

{0}: could not use parameter "{2}" because parameter "{3}" is not specified in definition file "{1}"

{0}: primary_conninfo parameter is not specified in postgresql.auto.conf

values of parameters for abnormality monitoring of operating system or server in server definition file "{1}" are too small for value of heartbeat_interval in arbitration definition file of arbitration server "{0}"

{0}: keyword "{1}" is not specified for primary_conninfo parameter in postgresql.auto.conf

{0}: keyword "{3}" is not specified for parameter "{2}" in definition file "{1}"

{0}: value that cannot be specified for keyword "{3}" of parameter "{2}" in definition file "{1}" is set

{0}: could not use parameter "{3}" because parameter "{2}" is specified in definition file "{1}"

{0}: value 'fallback' could not be specified for parameter heartbeat_error_action because parameter "{2}" is specified in definition file "{1}"

you can switch the connection destination of streaming replication of server "{0}"

you cannot switch the connection destination of streaming replication of server "{0}"

start to build in standby server "{0}"

failed to build in standby server "{0}"

build in standby server "{0}" completed

start to switch the connection destination of streaming replication

failed to switch the connection destination of streaming replication

start to switch the connection destination of streaming replication of server "{0}"

failed to switch the connection destination of streaming replication of server "{0}"

switch the connection destination of streaming replication of server "{0}" completed

switch forcibly the connection destination of streaming replication of server "{0}" completed

value of primary_conninfo parameter which is specified in postgresql.auto.conf file of server "{0}" has been updated to the value of parameter "{2}" which is specified in definition file "{1}"

failed to update value of primary_conninfo parameter which is specified in postgresql.auto.conf file of server "{0}" detail of cause:"{1}"

update value of parameter "{2}" to "{3}" which is specified in definition file "{1}" of server "{0}" has completed

failed to update value of parameter "{2}" which is specified in definition file "{1}" of server "{0}"

failed to check the consistency of LSN between server "{0}" and server "{1}"

failed to update value of parameter "{2}" which is specified in file "{1}" of old candidate primary server "{0}"

Mirroring Controller of the server "{0}" is not running

invalid combination of server own server type:{0} other server type:{1}

{0}: cannot execute detaching forcibly other than on operation center

standbycenter_mode parameter is specified in the definition file "{0}" of primary server

promoted to the primary server, although standbycenter_mode parameter is specified in the definition file "{1}" of the server "{0}"

write permission is denied on definition file "{0}"

{0}: invalid format value is specified for parameter "{2}" in definition file "{1}"

{0}: value is not set to keyword "{1}" of primary_conninfo parameter in postgresql.auto.conf

failed to start monitoring of database process

checking the consistency of LSN between server "{0}" and server "{1}" is not executed because candidate primary server is abnormal

The parameter node_role is set on Mirroring Controller process, but the parameter sc_port is not set on Mirroring Controller Arbitration process

The parameter node_role is not set on Mirroring Controller process, but the parameter sc_port is set on Mirroring Controller Arbitration process

The parameter node_role is "{0}" on Mirroring Controller process, but the node role is "{1}" on Mirroring Controller Arbitration process

failed to switch over

only the Mirroring Controller of the coordinator can be restarted

restarting Mirroring Controller

failed to restart Mirroring Controller target server:"{0}"

failed to connect connection manager

"{0}" has changed.

detected startup process hang on monitoring of database process:{0}

detected recovery from startup process hang on monitoring of database process

could not read file "{0}": exception={1}: {2}

{0}: wrong number of server ID in definition file "{1}"

{0}: server ID specified in definition file "{1}" too long (max {2} bytes) line {3}

{0}: wrong server ID in definition file "{1}"

invalid host name or IP address "{1}" in definition file "{0}"

{0}: invalid port number in definition file "{1}" line {2}

{0}: invalid format specified in definition file "{1}" line {2}

{0}: invalid value for parameter "{2}" in definition file "{1}"

{0}: no value for parameter "{2}" specified in definition file "{1}"

{0}: unrecognized parameter "{2}" in definition file "{1}"

%s: option "%s" duplicated

%s: "%s" option conflicts with "%s" option

%s: option requires an argument -- %s

%s: neither "%s" option nor environment variable "%s" specified

%s: argument of option "%s" is too long

%s: invalid option -- %s

%s: option "%s" is required

%s: unnecessary operand "%s"

%s: unrecognized operation mode or no operation mode specified

Try "%s --help" for more information.\n

%s: out of memory

another "{0}" command is running

Mirroring Controller Arbitration process is already running

cannot execute %s command because Mirroring Controller Arbitration process is not running

timeout waiting for communication with Mirroring Controller Arbitration process

could not create PID file of Mirroring Controller Arbitration process detail of cause:"{0}"

could not remove PID file of Mirroring Controller Arbitration process detail of cause:"%s"

could not read PID file of Mirroring Controller Arbitration process detail of cause:"%s"

invalid contents of PID file "%s" of Mirroring Controller Arbitration process

unexpected error occurred: {0}

system call error occurred:"%s" detail of cause:"%s"

failed to open communication environment detail of cause:"{0}"

could not read file "{0}": Permission denied

could not read the access privileges of {0}

failed to set the access privileges of {0}

could not get installation path

could not access "{0}" file detail of cause:"{1}"

invalid contents of "{0}" file

unusable character is included in path "%s" specified as a directory for Mirroring Controller Arbitration process

could not access path "%s" specified as a directory for Mirroring Controller Arbitration process detail of cause:"%s"

{0}: IP address "{2}" specified for parameter "my_address" in definition file "{1}" is not found

could not access path "{0}" for parameter "{1}" in definition file "{2}" detail of cause:"{3}"

{0}: users other than a command executor have the access privileges for definition file "{1}"

only the owner of definition file "{0}" can execute this command

starting Mirroring Controller Arbitration process

Mirroring Controller Arbitration process started

failed to start Mirroring Controller Arbitration process

stopping Mirroring Controller Arbitration process

Mirroring Controller Arbitration process stopped

could not stop Mirroring Controller Arbitration process because database server connects

failed to stop Mirroring Controller Arbitration process

stopping Mirroring Controller Arbitration process forcibly

Mirroring Controller Arbitration process stopped forcibly

failed to stop Mirroring Controller Arbitration process forcibly

database server "{0}" requested to arbitrate for database server "{1}" status

arbitrating the status of database server "{0}"

received response from database server "{0}"

could not receive response from database server "{0}"

rejected a request to arbitrate from database server "{0}"

database server "{0}" requested to fence database server "{1}"

executing fencing command

fencing command for database server "{0}" succeeded: result:"{1}"

fencing command for database server "{0}" failed: result:"{1}"

timeout waiting for the fencing command

rejected a request to fence from database server "{0}"

rejected a request to fence from database server "{0}" because the database server is a fencing target

database server "{0}" requested to disable standby server "{1}" to automatically switch

requested standby server "{0}" to disable automatically switching

disabled standby server "{0}" to automatically switch

failed to disable standby server "{0}" to automatically switch

omitted to disable standby server "{0}" to automatically switch

connection was requested from database server "{0}"

succeeded in connection with Mirroring Controller process of database server "{0}"

rejected a request to connect from database server "{0}" because of during the fencing command execution

disconnected from the database server "{0}"

the disallowed IP address "{0}" tried to access

tried to access from database srever with installed different product version IP address:"{0}"

the invalid server ID tried to access IP address:"{0}"

the combination of server IDs of arbitration server is incompatible with that of database server "{0}"

the invalid packet received

{0}: invalid server kind specified in definition file "{1}" line {2}

%s: invalid argument for option %s

installation environment is destroyed

no authority to execute this command

failed to start service "{0}" detail of cause:"{1}"

service "{0}" is not registered

service "%s" for Mirroring Controller Arbitration process was registered

failed to register service "%s" detail of cause:"%s"

service name "%s" is already in use

service "%s" for Mirroring Controller Arbitration process was unregistered

failed to unregister service "%s" detail of cause:"%s"

an error occurred in Mirroring Controller Arbitration process: {0}

value of heartbeat_interval in arbitration definition file "{1}" is too large compared with value of parameters for abnormality monitoring of operating system or server in server definition file of database server "{0}"

start to monitor of database server "{0}"

failed to start monitoring of database server "{0}"

stop Mirroring Controller Arbitration process forcibly because an error has occurred in Mirroring Controller Arbitration process: {0}

stop monitoring of database server "{0}"

detected an error on database server "{0}"

detected recovery of database server "{0}"

arbitration for database server "{0}" has been delayed

connection was requested from Scaleout Controller

succeeded in connection with Scaleout Controller process

node role of Mirroring Controller Arbitration process has been set to "{0}"

The parameter sc_port is not set on Mirroring Controller Arbitration process, but the parameter node_role is set on Mirroring Controller process

The node role is "{0}" on Mirroring Controller Arbitration process, but the parameter node_role is "{1}" on Mirroring Controller process

The parameter sc_port is set on Mirroring Controller Arbitration process, but the parameter node_role is not set on Mirroring Controller process

timeout waiting for communication with Scaleout Controller process

cannot send node status because Scaleout Controller process is not running

The node role is "{0}" on Mirroring Controller Arbitration process, but the node role is "{1}" on Scaleout Controller process

disconnected from the Scaleout Controller

{0}: wrong number of coordinator node in definition file "{1}"

{0}: no data node in definition file "{1}"

Scaleout Controller process is already running

cannot execute "{0}" command because Scaleout Controller process is not running

timeout waiting for communication with Scaleout Controller process

could not create PID file of Scaleout Controller process detail of cause:"{0}"

could not remove PID file of Scaleout Controller process detail of cause:"%s"

could not read PID file of Scaleout Controller process detail of cause:"{0}"

invalid contents of PID file "{0}" of Scaleout Controller process

unusable character is included in path "%s" specified as a directory for Scaleout Controller process

could not access path "%s" specified as a directory for Scaleout Controller process detail of cause:"%s"

The node role is "{0}" on Scaleout Controller process, but the node role is "{1}" on Mirroring Controller Arbitration process

an error occurred in Scaleout Controller process: {0}

starting Scaleout Controller process

starting Mirroring Controller Arbitration Process: "{0}"

requesting arbitration server "{0}" to connect

trying to connect to arbitration server "{0}"

succeeded in connection with arbitration server "{0}"

failed to connect to arbitration server "{0}" event:"{1}"

timeout waiting for communication with Mirroring Controller Arbitration process server:"{0}"

communication error with the arbitration server "{0}" occurred

failed to start Scaleout Controller because of could not connect to arbitration server "{0}"

values of parameters for abnormality monitoring of operating system or server in server definition file "{1}" are too small for value of heartbeat_interval in arbitration definition file of arbitration server "{0}"

Scaleout Controller process started

failed to start Scaleout Controller process

could not execute "mc_arb status -M {0}"

failed to report Scaleout Controller process status

stopping Scaleout Controller process

stopping Mirroring Controller Arbitration Process: {0}

could not stop Mirroring Controller Arbitration process "{0}"

Scaleout Controller process stopped

could not stop Scaleout Controller process because arbitration server connects

failed to stop Scaleout Controller process

cannot execute "{0}" command because Mirroring Controller Arbitration process is not running

restarting Scaleout Controller process

"{0}" has changed

failed to restart Scaleout Controller

add node "{0}" as a managed node by Scaleout Controller Process

both datanode "{0}" and coordinator node will perform failover

cannot continue operation on this center

cannot find primary server on coordinator node

cannot solve network disconnection between node:"{0}" and node:"{1}"

cannot solve network trouble between nodes, need to switch center

coordinator node will perform failover

datanode "{0}" is being detached

datanode "{0}" will perform failover

failed to perform failover on "{0}"

failover status was not true even the node did failover

got connection status of unrecognaized coordinator server

Invalid server type

no server with port "{0}" found

succeeded in performing failover node "{0}"

unknown coordinator server connected

could not execute because Mirroring Controller Arbitration process of the node "{0}" is not running

connection was requested from arbiter server "{0}"

disconnected from arbitration server "{0}"